Fast Input & Output
Authors: Benjamin Qi, Nathan Chen
Demonstrates how I/O speed can be the difference between TLE and AC.
Prerequisites
The USACO Instructions Page briefly mentions some ways of speeding up I/O:
For some of the more advanced problems with larger input sizes, competitors may benefit from using fast input/output, to more easily pass within the time limit. For C++ users, you may want to add "ios_base::sync_with_stdio(false); cin.tie(0);" to the top of your main method if you are using cin/cout. For Java users, you may want to use BufferedReader instead of Scanner.
What do these do and how much of a difference do these actually make? We'll use the following task to benchmark I/O speed:
Example Task
The input consists of two integers () and (), followed by a sequence of non-negative integers each less than .
- If , output the sum of the input sequence modulo .
- If , output the sum of each prefix of the input sequence modulo .
Sample Input 1:
1 6 1 2 3 4 5 1000000000
Sample Output 1:
1 3 6 10 15 8
Sample Input 2:
0 6 1 2 3 4 5 1000000000
Sample Output 2:
8
Randomly generating test data results in input and output files each ~10MB large. It is possible to see input files this large (the 11th input file for Robotic Cow Herd is ~10.3MB large), though not output files (the largest we know of is due to Minimum Cost Paths, which has an output file ~2.8MB large).
Status | Source | Problem Name | Difficulty | Tags | |
---|---|---|---|---|---|
Plat | Insane |
Standard I/O
Slow
Some simple methods of I/O don't come close to running under the time limit:
C++
cin/cout + endl (5.8s)
Java
Scanner + System.out.println (16.7s)
Python
input + print (18.9s)
Fast
C++
cin
/cout
If using cin
and cout
, include the following two lines.
ios::sync_with_stdio(false);cin.tie(nullptr);
Brief explanation:
- If you include
ios::sync_with_stdio(false)
, then mixing C (scanf
,printf
) and C++ (cin
,cout
) style I/O may produce unexpected results. The upside is that bothcin
/cout
become faster. - Including
cin.tie(nullptr)
will reduce the runtime if you are interleavingcin
andcout
(as is the case in the task at hand).
You can find more information about these lines at the end of this module.
cin/cout + unsync + \n (0.41s)
Warning!
Using endl
instead of "\n"
will flush the output buffer and cause the above
method to be quite slow:
cin/cout + unsync + endl (5.0s)
Though for interactive problems, you
need to flush the output buffer every time you use cout
. Any one of the
following will have the same effect:
- Not including
cin.tie(nullptr)
- Writing
cout << endl
instead ofcout << "\n"
- Writing
cout << "\n" << flush
instead ofcout << "\n"
scanf
/printf
scanf/printf (0.52s)
Java
Use BufferedReader
and PrintWriter
instead.
BufferedReader + PrintWriter (1.2s)
Python
Replacing input
with sys.stdin.readline
results in a huge speedup.
readline + print (2.9s)
Using sys.stdin.readline
and sys.stdout.write
is a bit faster:
readline + write (2.4s)
File I/O
Pretty similar to standard I/O.
C++
Slow
freopen + cin/cout (5.7s)
Fast
freopen + cin/cout + unsync + \n (0.42s)
freopen + scanf/printf (0.52s)
ifstream/ofstream (0.43s)
Java
Slow
Scanner + PrintWriter (3.4s)
Fast
BufferedReader + PrintWriter (1.2s)
A variant of the above method involves wrapping the BufferedReader
with a
StreamTokenizer
:
StreamTokenizer (1.2s)
Python
readline + write (2.4s)
C++
Even Faster Methods
The input methods described above are easy to type up from scratch and are usually fast enough for USACO contests. But if you're looking for something even faster ...
Using fread
and fwrite
reduces the runtime even further.
fread/fwrite (0.17s)
Java
Even Faster Methods
The input methods described above are easy to type up from scratch and are usually fast enough for USACO contests. But if you're looking for something even faster ...
Even faster than BufferedReader
is a custom-written Fast I/O class that reads
bytes directly from an
InputStream
.
InputStream + PrintWriter (0.84s)
Python
C++
Additional Notes
Resources | ||||
---|---|---|---|---|
CF | timing various I/O methods |
ios::sync_with_stdio(false)
Resources | ||||
---|---|---|---|---|
CPP | documentation | |||
SO |
From the second resource:
This disables the synchronization between the C and C++ standard streams. By default, all standard streams are synchronized, which in practice allows you to mix C- and C++-style I/O and get sensible and expected results. If you disable the synchronization, then C++ streams are allowed to have their own independent buffers, which makes mixing C- and C++-style I/O an adventure.
cin.tie(nullptr)
Resources | ||||
---|---|---|---|---|
CPP | documentation | |||
SO |
From the second resource:
This unties
cin
fromcout
. Tied streams ensure that one stream is flushed automatically before each I/O operation on the other stream.By default
cin
is tied tocout
to ensure a sensible user interaction. For example:std::cout << "Enter name:";std::cin >> name;If
cin
andcout
are tied, you can expect the output to be flushed (i.e., visible on the console) before the program prompts input from the user. If you untie the streams, the program might block waiting for the user to enter their name but the "Enter name" message is not yet visible (becausecout
is buffered by default, output is flushed/displayed on the console only on demand or when the buffer is full).So if you untie
cin
fromcout
, you must make sure to flushcout
manually every time you want to display something before expecting input oncin
.
Warning: cout.tie(nullptr)
You may see some competitive programmers including this line. This doesn't
actually do anything since cout
isn't tied to anything. See
this post for
details.
Java
Python
Problems
Status | Source | Problem Name | Difficulty | Tags | |
---|---|---|---|---|---|
CF | Normal |
Module Progress:
Join the USACO Forum!
Stuck on a problem, or don't understand a module? Join the USACO Forum and get help from other competitive programmers!